Midwest Super Cub's New and Improved Gas Pedal  This gas pedal is our own design with a bronze bushing and a finished slot for the linkage to freely slide.  No more sticky gas pedals.  This one works silky smooth.  Comes with hardware and 48" cable.  Priced at $36.00
 Replacement Throttle Cable for Gas Pedal Kit.  Cable is 48" long.  Longer lengths are available, but are slightly higher in price.  48" cable    $16.00 Rear Center Caps for Douglas Wheels & REAL Wheels $20.00 per pair.   Chrome Bubble Caps for Douglas 6" & 8" wheels $1.20 per pair.    Chrome Caps for 10" wheels $10.00 per pair.

Bosch Super Blue Coil - High Output Coil with internal resistor.  $40.00

Billet Aluminum Wheelie Wheels.  1.5" wide by 6" diameter.  1/2" mounting hole    $95.00 per pair.

Wheelie Bar kit (designs may vary)  These kits are designed to bolt onto the rear Cub Cadet housing. Lightning Bolt $50.00. IH design $60.00
.

Billet Aluminum Hitch.  NQS  Legal.  These hitches are used by the top pullers in the NQS.        $210.00

NQS Pulling Suitcase weights. #10 & #5 versions.  These are the same size as our older MSC weights.  7" across top, 7.750" tall, 5/8" hook slot, 4.750" across the bottom.   $17.00 each or buy 10 or more for $14.00 each.

3" tire grinding cup grits from 60 to 36      $38.00

4" tire grinding discs grits from 60 to 16     $38.00

Kill Switch - Grounding type                      $15.75

 High Velocity Cooling Fan. Draws just 2.6 amps - blows 145 CFM of air.                      $26.25

Lightweight Fiberglass Hood and Grille replica for Cub Cadet 08 series Cubs (108, 128 etc.).  These will also work on 1000 series Cubs.  Total weight is about 11 pounds.   $230.00
No Picture Available

Fiberglass Grille for Narrow Frame Cubs.  Replica of 102 - 122, also fits 104, 124, 106 and 126.  Will fit any narrow frame Cub.   This Grille weighs just 5 lbs.       $175.00

Digatron data logger. Model DT54KMax.  Monitor your engine RPM, exhaust temp, head temp and MPH.  Programmable LED Limit lights. PC downloadable. Easy installation. Stores 70 min run time.         Price $429.00

Additional leads for datalogger.  Use on more than one tractor.  One set of leads includes RPM, exhaust temp and head temp. Price $85.00

Quick Change Hubs.  Formula One style hubs for tractors.  One bolt removes tire and wheel assembly from axle.  Kit comes with one pair of axle spline hubs and one pair of wheel hubs. Easy installation.
Price $160.00
Additional Hubs $80.00/pr.

Reinforced Compressed Fiberglass Composite Hood for use with the fiberglass 102 grille.  Hood is made to fit the 102, but is adaptable to the other narrow frame models.  Comes unpainted and no holes drilled.  Weighs 1/3 the weight of the factory steel hood.             $115.00

Spring loaded Pin for front weight bracket.   $15.00

Wheel Spacers 1/4" thick. Fits most garden Tractors (5 holes on 4.5" bolt circle).  $15.00 pair.

Aluminum "Fake" Weight.  Same size as the 10 lb weight but only WEIGHS 3 LBS.  $15.00 each.

Custom Wheelie Wheels Left to Right: Cub Cadet Wheel -- IH Wheel -- John Deere Wheel $95.00/pair

Custom Logo and Text Design Available  Call for Pricing.

 Angled Grinding Cups for putting a like new edge on LawnTec and Cepek Tires.  $60.00

Carb Dust Cover fits most Kohler Carb V-Stacks $2.00 each.
Various Colors Available

Extra Large Dust Cover fits Super D Carb.  $3.00 each
Various Colors Available

Exhaust Pipe Covers Various Colors Available $8.00 each

  

 

Half Pint Chassis Packages:
1. Assembly-ready frame rails w/instructional DVD 
Single Cylinder Kohler $300.00
V-Twin Command $325.00
(includes all holes drilled in rails for transmission and engine)
2. Complete Half Pint frame ready for engine, clutch and transmission
Single Cylinder Kohler $1,300.00
V-Twin Command $1,350.00
(includes welded frame assembly with front spindles, front weight boom and brackets, side weight frames, step drilled for gas pedal
clutch pedal and release rod, clutch support assembly set up MSC clutch system and rear cross member drilled for cub steering gear.)
3. Complete turn key Half Pint Tractor
Single Cylinder MVP Engine $10,478.00 See Photo
V-Twin Pro Altered Command $9,812.00 See Video
(includes MVP NQS Version Crate Motor set up for PS/SS or a MVP Pro Altered
 Engine, 4 speed trans with drop box, 10 puck MSC clutch system, 3.50x6  tri ribs on Douglas fronts, 26x12x12 LawnTecs
 mounted on 12x12 6/6 Douglas, wheelie bars, MSC hitch. Your choice of over 50 different colors)  
Weights not included.  The tractor would be basically like one of our Half Pint tractors. 
 Solid Front Axle  Steel Front Axle weighs 8 lbs. It enables you to lower the front end dramatically. It features spherical ball tie-rod ends and bronze bushed kingpins.  Universal mounting for narrow or wide frame Cub Cadets.  This is the same axle we installed on our standard Cub Cadets (Slam Dunk, Cubzilla, Quarter Scale I  & II)  Priced at $125.00 Aluminum fenders.  8" wide x 36" long.  Rolled to match rear tires of tractor.  $90.00 per pair.

 

1.5" liquid filled fuel pressure gauge.  0 to 15 lbs.  Midwest Super Logo in center.  $18.00 Bumper Bars for Wheelie Bars.  This is an aluminum bumper bar (includes two pieces) for our wheelie bars.  Bolts in at rear with bolt to hold the wheelie wheels on and buyer has to install an additional bolt to keep bumper bar rigid.  Bumper bars are good protection from the sled climbing up on rear of tractor (required in some clubs) and to use as a push bar to push tractor around with a four wheeler.   Bumpers are 6" high and designed to work with 6" diameter wheelie wheels.  Two styles available.  Plain Bumper Bars $25.00/pr.   IH Logo Bumper Bars $35.00/pr.

Wheelie Bar Cross Brace for Cub Cadets, Now says MWSC in small print in corner.  This is an aluminum cross brace for our wheelie bars.  Bolts in at rear with bolt to hold the wheelie wheels on and buyer has to install an additional bolt to keep brace rigid.  Priced at $30.00