Gear Sets for Cub Cadet. Made in U.S.A.  Set includes top cluster gear and two bottom gears.  Please indicate gear sets by top shaft (cluster gear) tooth counts   $150.00 Over drive and under drive front gear sets; Over drives are 10%, 16%, 23%, 26%, 33%, 38%, 43% and 47%.  Under drives are 10% and 20%.  $160.00 except 26%-47% $210 One Faster Pinion gear for front reduction.  This gear replaces the stock 12 tooth pinion.  Speeds transmission up about one tooth faster (a 19 tooth 2nd would pull like a 20 tooth) $75.00 Super Tough Top Shaft; Much stronger than stock.  Made not to twist.  $75.00 Pinion Bearing Holder to support front pinion shaft bearing.  Help prevent ring/pinion failures.    $50.00 CNC Machined Bearing Cups for Dart Carriers.  $105.00/pr. 4-Speed Forks.  CNC Machined and Heat Treated.   $120.00/set 4-Speed Spacer Kit too be used with forks. $25.00 One Pinion Top Pinion Kit.  Includes pinion, bearing, seal and snap ring               $100.00 Dart Carrier and axles set up.  Available in three prices.  $400.00 no bearing cups/$500.00 with bearing cups/$550.00 complete with machined axle sleeves (core required on sleeves). Complete Transaxle with all heavy duty parts. Does not come with True Gear ring and pinion, but is available.  2 pulling gears $1,135.00;  3 pulling gears $1,285.00;  4 pulling gears $1,285.00;  $300 more without core. Steel Spool Kit and Axles for Cub Cadets.  No machining required, bolts right in.  $330.00 Four Speed Package.  Two gear sets, top shaft, shift forks and spacer kit.           $460.00 Replacement 12 tooth pinion.  A direct replacement from stock.  Made from superior material.                      $75.00 Replacement Pinion Seal $11.44 Replacement Pinion Brg. $12.80 Replacement Snap Ring   $5.16 Machined Front Spacer for 2nd & 3rd Gear Swap.        $10.00 Aluminum Reduction Housing for Cub Cadet Transaxle.  Weighs just 6.5#.      $295.00 Aluminum Transaxle Housing. Weighs 30#               $850.00 Combo reduction housing and trans housing.            $1,000.00 Aluminum Drop Box to build tractor like Half Pint w/gear and attaching hardware.    $675.00 Rear Cup bearing for top pinion.                         $27.28 Rear Carrier Shims .003", .007", .014" and .028" thickness. $4.00 ea. or Assortment 4-pack $10.00/pkg.   Disc brake set ups for spool and dart carrier rears.  spools require only one disc brake axle and darts require two disc brake axles.  Spool Disc $40.00 additional.  Dart Disc (2) are $80.00 additional. Patent Pending steel billet carrier, uses MWSC bearing cups and bearings for Dart set ups.  All new parts including custom axles.  Priced at $425.00 for carrier, axles and bearings.  Priced at $525.00 for the Do-it-yourself kit comes with carrier, axles, bearing cups and bearings.  Priced at $575.00 for the Complete kit, comes with carrier, axles, bearing cups, bearings and machined axle housings (core charge on axle housings).  Super Finished Heavy Duty Ring and Pinion Gear Sets  Patent Pending Heavy Duty Ring and Pinion gear set.  Uses 3/8" bolts that attaches from the rear side of ring gear, doubling the strength of the gear set.  Bolts directly to Dart and Steel Carrier.  Super finished  Priced at $468.00 Bottom Pinion Shaft Shim Set These shims are used to adjust the pinion depth on the ring and pinion for Cub Cadet transmissions.  Improper depth will cause ring gear failures.  Shim set includes three shims .010", .020" and .030" thick.  Priced at $10.00 per set.   Gasket Sets for Cub Cadet Transmissions  Complete gasket set for the cub transmission.  Includes shifter gasket, front cover gasket, reduction housing gasket, rear cover gasket and two axle housing gaskets.  $30.00 per set